Home / Beds / Beds: Sizes, Frames and Storage Explained

Beds: Sizes, Frames and Storage Explained

A bed is a frame, a base and a mattress working together, and each part affects how the others perform. Get the size right, choose a frame that suits the room, and check how the base supports the mattress. This guide works through sizes, frames, storage and the checks worth making before you buy.

Summary Verdict

A good bed starts with the right size for the room and the sleepers, then a frame built to stay square and quiet. Storage is useful only if the mechanism is easy to use every day.

Best for

Sleepers who measure first and choose a frame to match the room, not the showroom.

Rooms that need storage without giving up floor space to extra furniture.

Watch out for

Frames that creak or wobble when you sit on the edge or turn over.

Mattress sizes that do not match the frame, leaving gaps at the sides or ends.

Standard UK bed sizes

UK bed sizes follow a standard pattern, and the mattress size and the frame size are usually described by the same name. A single is 90 x 190 cm, a small double is 120 x 190 cm, a double is 135 x 190 cm, a king is 150 x 200 cm and a super king is 180 x 200 cm. These are approximate standard sizes, and a frame adds a few centimetres on each side for the headboard, the side rails and the foot end.

The length matters as much as the width. Standard lengths are 190 cm for single, small double and double beds, and 200 cm for king and super king beds. Taller sleepers may need a longer frame, and that is worth checking before ordering, because a longer bed changes the room layout as well as the bedding size.

SizeMattress sizeSuits
Single90 x 190 cmOne sleeper, a child or a guest room
Small double120 x 190 cmOne sleeper who wants more room
Double135 x 190 cmTwo sleepers in a standard bedroom
King150 x 200 cmTwo sleepers who want extra width
Super king180 x 200 cmTwo sleepers in a large bedroom

How a bed frame works

A bed frame is a rectangle of side rails held together by a headboard and a foot end, with a base inside that carries the mattress. The joints where the rails meet the headboard do most of the work, so they need to be solid and tight. Bolts and brackets hold better over time than simple hooks or slots, and a centre rail with a support leg keeps a wide frame from sagging in the middle.

The base sits inside the frame and decides how the mattress is supported. Slatted bases use a row of wooden slats, solid bases use a flat panel, and divan bases use a fabric-covered box. Each type changes how firm the mattress feels, so the frame and the base should be chosen together rather than as separate items.

Wood frames

Wooden frames are the most common type, and they range from solid pine and oak to veneered boards and engineered timber. Solid wood is heavier and usually stiffer, while veneered boards are lighter and cheaper but can chip at the edges. The grain direction matters: rails should run with the grain along their length, because short grain across a rail is weaker and more likely to split at a joint.

Check the joints before anything else. Mortise and tenon joints, dowels and bolted brackets all hold well when they are cut accurately, but a loose joint will creak and work looser over time. Look for rails that sit flush with the headboard, fixings that tighten without spinning, and a finish that is smooth to the touch with no rough edges or splinters.

Metal frames

Metal frames are usually made from steel tube or rod, welded or bolted into a rectangle with a slatted or mesh base. They are lighter than wood, easy to move, and simple to clean, which suits guest rooms and rented homes. The trade-off is that thin tube can flex, and a frame that flexes will creak where the parts meet.

Look for tube walls that feel solid rather than thin, welds that are smooth and even, and joints that bolt tight without play. A centre support bar matters on wider metal frames, and plastic glides on the feet protect hard floors. Metal frames suit modern rooms, but they can feel cold to the touch and show scratches more readily than wood.

Measure the room, the doorway and the frame, in that order. A bed that cannot get through the door is the most common buying mistake.

Upholstered frames

Upholstered frames have a padded headboard and side rails covered in fabric, which softens the look of the bed and makes leaning against the headboard more comfortable. The padding is usually foam over a timber or board frame, and the fabric is stretched and stapled underneath. The quality of the frame underneath matters just as much as on a wooden frame, because the fabric hides the structure.

Fabric choice affects upkeep. A plain weave is easier to vacuum and spot clean than a deep pile, and a removable headboard cover is easier to keep clean than a fixed one. Check that the padding is even, with no lumps at the corners, and that the fabric is tight with no sagging along the rails.

Divan bases

A divan is a fabric-covered base that replaces the frame, and the mattress sits directly on top of it. The base is usually a timber box with a firm top, and it often contains drawers on one or both sides. Divans suit rooms where a simple, low-profile bed is wanted, and they are common in guest rooms and smaller bedrooms because they take up no more floor space than the mattress itself.

The headboard is usually a separate panel that bolts to the back of the base, so it can be chosen in a matching or contrasting fabric. Divan beds explained in full covers base types, drawer layouts and the checks to make. Divan bases are firm, so a mattress that feels soft on a slatted frame can feel firmer on a divan.

Ottoman and drawer storage

Storage beds hide space under the mattress, and the two main types work differently. A drawer bed has drawers that pull out from the side, which is simple and reliable but needs clear floor space beside the bed. An ottoman bed lifts the whole mattress on gas struts, opening the full area underneath, which suits rooms where there is no space to pull a drawer out.

Ottoman storage holds more, but the lift mechanism does extra work every time it is opened, so the struts and hinges need to be strong and smooth. Ottoman beds and their lift mechanism explains how the gas lift works and what to check. Whichever type you choose, measure the space the storage needs to open, not just the footprint of the bed.

Slats, solid tops and mattress support

Slats are the most common base, and their spacing changes how a mattress feels. Narrow gaps give firmer, more even support, while wide gaps let a soft mattress sag between the slats. Sprung slats flex slightly and soften the feel, while solid flat slats give a firmer feel. If the slats are too far apart, a mattress can dip, and that dip shows up as a hollow in the middle of the bed.

A solid top gives the firmest support and suits heavier mattresses, but it gives no airflow underneath, so moisture can collect. Slatted bases allow air to move, which helps the mattress stay dry. The guide to mattresses explains how support and filling work together, and it is worth reading alongside this one before choosing a base.

Checks to make before you buy

Sit on the edge of the bed and lie down on it, then turn over and sit up again. Listen for creaks and feel for movement in the joints. Press down on the middle of the base to check for sag, and lift a corner of the mattress to look at the slats or the top. The frame should feel rigid, with no twist when you push one corner.

Measure the room, the doorway, the stairs and the landing before ordering, and write the numbers down. Check the height of the finished bed with the mattress on top, because a tall frame plus a deep mattress can make getting in and out awkward. Finally, check how the bed is delivered and whether it needs assembling, because a large frame may arrive in parts.