Oak furniture can be painted, and painted oak is a common way to update a worn or dated piece. The grain and the tannins in the wood need preparation first, or the paint will not stick and stains will bleed through. This guide explains the preparation, the paint to use and when to leave the wood bare.
Painting oak suits a worn, dated or mismatched piece that would otherwise go unused. It is less suited to a good quality solid oak piece, where the grain is the reason to own it.
Best for
Worn or dated pieces that need a new life.
Rooms where a painted finish suits the style better than bare wood.
Watch out for
Tannins can bleed through paint as yellow stains.
Paint is hard to remove, so the decision is hard to reverse.
Why oak needs preparation
Oak is an open grained wood with a high tannin content, and both facts matter when you paint it. The open grain will show through a thin coat of paint as a texture, and the tannins can bleed through the paint as yellow or brown stains, especially on knots and on pieces that have been oiled. Preparation deals with both problems before the paint goes on.
Paint also needs a surface it can grip. A lacquered or waxed finish is smooth and will not hold paint, so it must be sanded back or removed. An oiled finish will repel paint in the same way. Cleaning and sanding are not optional steps; they are what make the paint stay on the wood.
Cleaning and sanding
Start by cleaning the piece thoroughly. Dust it, wipe it with a damp cloth and a little mild soap, then let it dry fully. Remove the handles and any hardware, and take out drawers so you can paint the frame and the drawer fronts separately. Label the drawers so they go back in the right order.
Take the piece apart as far as it will come apart without force. Remove drawers, doors and shelves, and unscrew the legs if they come off easily. Painting the parts separately gives a neater finish, because you can reach the edges and the corners that would be hidden when the piece is assembled. Keep the screws and fixings in a labelled bag so nothing is lost.
Sand the whole piece with a medium grit paper, working with the grain. The aim is to key the surface, which means giving the paint something to grip, not to sand back to bare wood. On a lacquered piece, sand until the shine is gone. Vacuum the dust and wipe the surface with a tack cloth before you prime.
Priming and stain blocking
Prime with a stain blocking primer, which is made to stop tannins bleeding through the paint. Apply one coat over the whole piece, paying attention to knots and to any areas where the wood is darker, because those are where stains appear first. Let the primer dry fully, then check for any yellow patches showing through.
If a stain shows through the primer, apply a second coat to that area and let it dry again. It is better to spend time on the primer than to find stains appearing after the top coat is on, because by then the only fix is to sand back and start again. A good primer is the difference between a lasting paint job and a disappointing one.
Paint hides the grain, and the grain is the reason most people buy oak. Paint a piece because it needs a new life, not because the wood has done something wrong.
Choosing the paint
Use a paint made for furniture, because it is harder wearing than wall paint and it resists knocks and scuffs. Chalk paint is popular for a matt, vintage look, but it needs a wax or lacquer coat on top to protect it. Eggshell and satin paints give a soft sheen and are durable enough for a table or a chest of drawers without a top coat.
A brush leaves a slight texture, which suits a traditional piece, while a small roller gives a smoother finish on flat areas such as a table top or a wardrobe door. A spray gun gives the smoothest finish of all, but it needs a well ventilated space and masking for everything around the piece. Choose the tool that suits the piece and the space you have to work in.
Apply the paint in two thin coats rather than one thick coat, letting the first coat dry fully before the second. A thick coat will drip, pool in corners and take far longer to harden. Use a brush for detail and a small roller for flat areas, and work with the grain where the grain still shows through.
Painting the grain or filling it
The grain of oak will show through paint unless you fill it. Some people like the texture, because it shows that the piece is real wood, while others want a smooth painted finish. If you want a smooth finish, apply a grain filler before the primer, sand it back when dry, then prime and paint as normal.
Filling the grain takes time, because oak has deep pores and the filler needs to be worked into them. It also uses more filler than a close grained wood would. Decide before you start whether the grain texture matters to you, because filling it after the paint is on is not possible without starting again.
Finishing and protecting the paint
Once the paint is dry, protect it with a clear top coat if the piece will be used hard. A table top, a desk or a chest of drawers that children use will benefit from a coat of clear wax or lacquer over the paint. Let the paint harden for a few days before you put heavy objects on it, because paint that feels dry can still be soft underneath.
Refit the handles and hardware, and put the drawers back in their places. Check that the drawers still slide freely, because paint adds thickness and a drawer that was a close fit may now stick. Sand the edges of a sticking drawer lightly until it moves freely again.
When to leave the oak bare
Some pieces should not be painted. A good quality solid oak piece with a clear, even grain is worth more unpainted, and the grain is the reason to own it. A valuable antique can lose value if it is painted, and a piece with a rare or figured grain will look better oiled than painted.
Pros
- Gives a worn or dated piece a new life
- Matches oak to a painted room scheme
- Hides stains and mismatched boards
Cons
- Hides the grain, which is the point of oak
- Hard to reverse once the paint is on
- Tannins can bleed through without a stain blocking primer
If the piece is sound and the grain is good, consider restoring it instead. Restoring oak furniture explains how to clean, repair and refinish a piece, which is often the better choice for solid oak that is simply worn.