A corner desk fits into the corner of a room, with a work surface running along two walls, and it gives more desk in the same floor space than a straight desk. It suits a room where the desk has to tuck into a corner, and it gives two work areas: one for the computer and one for papers. This guide explains the shapes, the sizes and how to measure.
A corner desk suits a room with a free corner and work that needs two areas, provided both walls are measured and the corner is square enough for the desk to sit flat.
Best for
Home offices in a corner of a bedroom or a spare room.
Anyone who wants a computer area and a writing area on one desk.
Watch out for
A corner that is not square, which leaves a gap behind the desk.
A desk too deep for the room, which blocks the door or the walkway.
What a corner desk is
A corner desk is a desk in an L shape, with a work surface along two walls meeting in a corner. The long side usually holds the computer, and the short side holds papers, a printer or a second work area. The corner itself is often curved or cut at an angle, so the sitter can sit in the corner and reach both sides without stretching.
Corner desks are usually made from two pieces joined together, or from a single L shaped top on legs or a frame. The join should be tight and level, so the two surfaces meet without a step or a gap. Ask how the pieces join and whether they can be separated again if you move house, because a corner desk that cannot be split is hard to move.
L shapes and returns
The L shape can run in either direction: the long side on the left wall or on the right wall. The handing matters, because the desk has to fit the room, the door and the window. Some corner desks are reversible, with the return piece able to go on either side, and some are fixed. Check the handing before you order, and draw the room on paper to confirm it.
A return is a shorter piece that joins the main desk at a right angle, and it can be used as a second work area or as a place for a printer. Some returns are the same depth as the main desk, and some are shallower. A shallow return suits papers and a printer, while a deep return suits a second monitor or a drawing area. Choose the return to match the work.
Sizes and measuring
A corner desk is measured on both sides: the length along one wall and the length along the other. A typical corner desk is 120 to 160 centimetres on each side, with a depth of 60 to 80 centimetres, but the range varies, so check the listing for the desk you want. The depth decides how much work surface you get and how much floor space the desk takes.
Measure both walls, and check that the corner is square. Many rooms have corners that are not quite square, because the walls are not perfectly straight, and a desk built for a square corner will leave a gap behind it if the corner is out. Measure at the floor and at the desk height, because a wall can lean. A gap behind the desk is not just untidy: it is where papers and pens fall and cannot be reached.
| Measurement | What to check | Why it matters |
|---|---|---|
| Long side | Length along one wall | Decides if it fits the wall |
| Short side | Length along the other wall | Decides if it blocks a door |
| Depth | Depth of the work surface | Decides the work area |
| Corner angle | Whether the corner is square | Decides if the desk sits flat |
| Door swing | Whether the door hits the desk | Decides the usable space |
Sitting in the corner
The sitter usually sits in the corner, facing out into the room, with work on both sides. The corner seat should have room for the chair to pull out and for the legs to fit underneath, without the chair hitting the desk on either side. Sit in the position you will work in, and check that you can reach both sides without stretching or twisting.
The corner can also be a dead space. If the desk is deep, the back of the corner is hard to reach, and it becomes a place where papers gather and dust collects. A curved or angled corner is easier to use than a sharp corner, because it brings the work closer. If you will sit on one side rather than in the corner, say so, because the desk can be set up differently.
Many rooms have corners that are not quite square, and a desk built for a square corner will leave a gap behind it.
Cables and storage
A corner desk has two work areas, and both need power and cables. Look for cable holes in both sides of the top, or a cable tray that runs along both sides. The cables should be routed neatly, because a corner desk has more cables than a straight desk, and a tangle in the corner is harder to reach and harder to sort out.
Storage on a corner desk is usually drawers under one side, or a separate unit beside the desk. Drawers under the desk take leg room, so put them on the side you use less, and keep the side you sit at clear. A printer on the return should be within reach, and the paper should be stored nearby, so you are not getting up every time you print.
What to check before buying
Measure both walls, check the corner is square, and draw the room on paper with the door and the window marked. Sit at the desk in the position you will work in, and check that you can reach both sides. Press the top to test for flex, push the desk to test for wobble, and check that the join between the two pieces is tight and level.
Check how the desk is delivered and whether it needs assembling, and whether it arrives in pieces that can be carried through the door. A corner desk that fits the room, the corner and the work is a desk that will be used every day. The guide to desks explains the general checks, and the guide to choosing a desk explains measuring in more detail.