Garden furniture has to do two jobs at once. It has to be comfortable enough to sit in for an afternoon, and tough enough to live outside through rain, sun and frost. The material decides how much of each you get, so it is worth understanding wood, metal, weave and plastic before you choose a set.
Choose the material for the weather and the upkeep you are willing to do, then check the frame and the seat size before you buy.
Best for
Gardens with room for a dining set or a lounge set, used through spring and summer.
Anyone who wants furniture that stays outside with a cover over winter.
Watch out for
Thin frames, wobbly joints and seats that feel too shallow or too narrow.
Untreated softwood and bare steel, which weather fast without protection.
What garden furniture is made from
Most garden furniture is made from one of four materials: wood, metal, woven rattan or plastic. Wood feels warm and looks natural, and it suits a planted garden well. Metal is strong and slim, so it works where space is tight. Woven rattan gives a deep, soft seat without the weight of solid wood. Plastic is light, cheap and easy to move, and it needs almost no care. Each material has a weakness too, and knowing it before you buy saves disappointment later.
The frame matters as much as the surface. A wooden set stands on its joints, a metal set on its welds, and a woven set on the frame hidden under the weave. Look underneath before you buy. Joints should be tight, welds should be smooth, and the frame should not flex when you press on it.
Wood: teak, acacia and softwood
Teak is the best known garden wood because it holds up well outside. It is dense, oily by nature and slow to rot, and it weathers to a silver grey if it is left untreated. Acacia is a cheaper hardwood that looks similar at first, but it needs more care and does not last as long as teak. Softwood, usually pine or spruce, is the lightest and cheapest option, and it only survives outside if it is treated and re-treated regularly.
Wooden furniture needs a little attention each year. A wash in spring, a check of the joints and a coat of oil or stain where the maker recommends it will keep it sound. Slats should be even and free of splits, and screws should sit flush rather than proud. If a wooden chair creaks when you sit, the joints may already be loose, and that is worth knowing before the set goes home.
Metal: aluminium and steel
Aluminium is the most practical garden metal. It does not rust, it is light enough to move around the garden, and it can be cast or bent into slim, neat shapes. Steel is heavier and stronger, so it suits larger tables and benches, but bare steel will rust where the coating is chipped. Most steel garden furniture is powder coated, and the coating is the only thing standing between the metal and the rain.
Check a metal set by looking at the joints and the feet. Welds should be even with no gaps, and the feet should have caps or glides so they do not scratch paving or sink into lawn. A table that rocks on a flat floor will rock on a patio too. Cast aluminium can be brittle if it is very thin, so a gentle press on the arms and back will tell you whether the frame feels honest.
Rattan weave and plastic
Most rattan garden furniture is not natural rattan at all. It is a synthetic weave, usually made from polyethylene, woven over an aluminium or steel frame. The weave is weather resistant, it does not fade quickly, and it can be left outside in rain. Natural rattan is a plant fibre, and it belongs indoors, because it swells and weakens when it gets wet. If a listing just says rattan, check whether the weave is synthetic. The guide to rattan garden furniture explains the weave, the frames and the care in detail.
Plastic furniture is made from moulded resin, and it is the simplest choice of all. It does not rot, it does not rust, and it washes clean with soapy water. The trade off is feel and strength. Thin plastic chairs flex under weight and can crack in cold weather, and pale colours can fade in strong sun. Thick, well made resin chairs are a different matter, and they can last for years with almost no attention.
| Material | Upkeep | Weight | Weather |
|---|---|---|---|
| Wood | Wash and oil each year | Heavy | Weathers to grey if untreated |
| Aluminium | Wash only | Light | Does not rust |
| Steel | Check coating for chips | Heavy | Rusts where coating fails |
| Synthetic weave | Wash and brush | Medium | Stands up well to rain |
| Plastic | Wash only | Light | Can fade and crack in frost |
Dining sets, lounge sets and corner sets
A dining set is built around a table and upright chairs, and it suits meals outside. A lounge set is built around low, deep seats, and it suits long afternoons and evening drinks. A corner set combines a sofa that runs along two sides with a table in front, and it seats more people in the same footprint. Each type asks for a different amount of space, and the mistake is usually buying the lounge set when the garden only fits a dining set. The guide to garden furniture sets explains the sizes and the layouts in detail.
Seat counts run from two to eight, and the number on the listing is not always the number of people who will sit comfortably. A four seat dining set needs room for four chairs to pull out, and a six seat corner set needs a wall or fence on two sides. Measure the space, then measure the set, and leave room to walk around it. A set that fills the patio edge to edge will feel cramped even on a warm day.
A garden set is bought once and sat in for years, so the frame underneath matters more than the colour on top.
Measuring your space
Measure the length and width of the patio or deck, and note where the doors open, where the sun falls and where the rain collects. A dining table needs about 60 centimetres of width per person and room behind each chair to pull out and stand up. A lounge set needs less table space but more depth, because the seats are lower and deeper than dining chairs.
Write the numbers down and take them shopping, whether that is a shop or a website. Check the listed dimensions against your tape, and remember that a cover, a parasol base and a path around the set all take space too. If the set has to fold or stack for winter, check that it does so easily and that the folded size fits the shed or garage. A set that cannot be stored is a set that has to survive winter uncovered.
Cushions, covers and parasols
Cushions make a woven or metal seat comfortable, but they are also the part that suffers most from rain. Look for covers that come off, so they can be washed, and for filling that dries out rather than holding water. Thin cushions on a deep seat will feel hard within an hour, while a thick cushion on a shallow seat will push you forward. Sit on the set with the cushions in place, not without them.
A cover is the cheapest way to make a set last. It keeps rain off the joints, stops bird droppings marking the surface and keeps frost out of cracks. A parasol needs a base heavy enough to hold it in wind, and the pole should pass through the table or stand beside it without blocking a seat.
What to check before buying
Sit in every chair, not just one. The seat should support your thighs without pressing behind the knees, and the back should meet your shoulders without forcing you upright. Lift the table at one corner to test for wobble, and run a hand along the edges to check for sharp spots or rough welds. Ask how the set should be stored over winter, and whether the cushions and covers are included or sold separately.
Check the fixings too. Screws should be stainless or coated, so they do not rust and stain the wood around them. On a woven set, look at the weave where it meets the frame, because a loose end there will unravel. On a wooden set, look at the end grain, because splits start there. These small checks take five minutes, and they tell you more than any description on a listing.