Habitat tables cover dining tables, coffee tables, side tables and desks in plain modern designs. The tops are usually solid wood, veneer or painted finishes, with wood or metal legs. This guide explains the ranges, how the tables are joined and what to check before you buy.
Habitat tables suit small to medium rooms that need a plain, practical table. They are less suited to households that want a heavy solid wood dining table for daily use by a large family.
Best for
Everyday dining in small to medium rooms.
Coffee and side tables that match a modern living room.
Watch out for
Thin tops can flex on wide spans, so check the thickness.
Extending mechanisms need a smooth action and a firm lock.
Dining tables
Habitat dining tables come in round, rectangular and extending designs. Round tables seat four comfortably and suit a corner or a small dining area, while rectangular tables seat four to six and fit better against a wall. Extending tables have a leaf or a butterfly fold that adds space when guests come, then folds away again.
Chairs are usually sold separately, so the table and the chairs need choosing together. A chair that is too tall for the table will leave your elbows high, while one that is too low will leave you reaching up to the plate. The seat height of the chair and the height of the table top should be checked together, not separately.
The tops are usually solid wood, veneer or a painted finish. Solid wood is the heaviest and the most durable, but it costs more. Veneer gives the look of wood at a lower price, and a painted finish hides the grain entirely, which suits a modern room. The choice is mostly about look and budget, not about strength.
How the joints work
A table is only as strong as the joint between the top and the legs. Habitat tables usually join the legs with bolts, dowels or metal brackets, and some designs add an apron, which is a wooden rail running under the top between the legs. The apron stops the top from flexing and keeps the legs square.
When the table arrives, check each joint before you tighten it fully. The legs should sit flat on the floor with no rocking, and the top should not flex when you press down in the middle. If a leg rocks, loosen the bolts, press the table down firmly on a flat floor, then tighten the bolts again in turn.
Extending tables
An extending table is useful when the dining room is small most of the week and busy at weekends. The common designs are a leaf that slots into the middle, a butterfly leaf that folds out from under the top, and a drop leaf that folds down at the sides. Each design has its own way of locking the extension in place.
Test the mechanism before the table is loaded with plates. The leaf should slide or fold smoothly, and the lock should hold it level with the rest of the top. A leaf that sits slightly high or low will catch plates and glasses, so check the join with your hand as well as your eye.
A table top tells you its quality when you press it. A thick top on a well braced frame stays still, while a thin top on a wide span will flex under your hand.
Coffee tables and side tables
Coffee tables in the Habitat range are usually rectangular or oval, with a top at about knee height and a lower shelf on some designs. Side tables are smaller, made to sit beside a sofa or an armchair, and they often match the coffee table in the same range. The materials are the same as the dining tables: wood, veneer or painted finishes, with metal legs on some designs.
The main check for a low table is stability. A coffee table gets knocked, leaned on and used as a footrest, so it needs a wide base and a low centre of gravity. Press one corner firmly: the table should stay put rather than tipping. Glass tops need a check too, for chips along the edge and for the thickness of the glass.
Desks and work tables
Habitat desks are simple work tables with a flat top and either legs or a drawer unit at one side. Some have a cable hole in the top for a computer, and some have a small drawer for pens and paper. The sizes are aimed at a spare room or a corner of a bedroom rather than a full office.
A desk in a bedroom or a spare room needs the same checks as a dining table: a flat top, steady legs and enough depth for the work you will do on it. A desk that is too shallow will leave the keyboard close to the edge, while one that is too deep will push you too far from the wall. Check the cable hole too, if you plan to use a computer on it.
For a desk, the height matters most. A standard desk top sits about 73 to 75 centimetres from the floor, which suits most chairs. Check the depth as well: a desk that is only 45 centimetres deep will not hold a monitor and a keyboard comfortably, while 60 centimetres gives room to work without feeling cramped.
Sizes and fitting the room
Measure the space before you order. A dining table needs about 75 centimetres of clear space on each side where people pull out chairs, so a room that is only just wider than the table will feel cramped. A coffee table should sit about 40 centimetres from the sofa, close enough to reach and far enough to walk past.
Also measure the route the table will take into the room. Dining tables arrive flat packed, but the top is still a large flat box, and it may not turn a tight hallway. Check the box dimensions in the listing, not just the finished size of the table.
What to check before buying
Read the listing for the top material, the top thickness, the finished dimensions and whether assembly is needed. Check whether the chairs are included with a dining table, because they are usually sold separately. Look at the finish too: a veneer top needs coasters and mats, while a painted top is more forgiving of hot cups.
Pros
- Plain designs that fit most rooms
- Extending options for small dining rooms
- Matching chairs and side tables in the same range
Cons
- Thin tops can flex on wide tables
- Chairs usually sold separately
- Veneer tops need protection from heat and water
Check the delivery and returns policy of the retailer you buy through, and keep the packaging until the table is built and standing level. Habitat sofas and other furniture from the same ranges share the same finishes, so a table can be matched to the rest of the room without much effort.