A double bed is 135 cm wide at the mattress, and the frame adds a few centimetres on each side. That sounds simple, but the width that matters is the finished width in the room, and the space each sleeper gets. This guide answers the width question properly, with comparisons and room measurements.
A double bed is 135 cm wide, and the frame takes that to roughly 145 cm. That width suits most couples, but the room needs to be wide enough to leave walking space on both sides.
Best for
Anyone checking whether a double will fit a bedroom.
Couples comparing a double with a small double or a king.
Watch out for
Rooms under about 270 cm wide, where the bed leaves no walking space.
Bedding bought for a double when the bed is a small double.
The answer: 135 cm
A standard UK double bed is 135 cm wide at the mattress. That is the width to use when buying sheets, duvets and mattress protectors, and it is the width every retailer means when they say double. The length is 190 cm, which is the same as a single and a small double, so the width is the measurement that sets a double apart.
The frame is wider than the mattress, usually by 5 to 10 cm on each side, depending on the thickness of the side rails and the headboard. A wooden frame with thick rails can reach 150 cm overall, while a divan base is closer to 140 cm. Always check the finished width of the exact model, not just the mattress size. The difference between makers can be 10 cm, which is enough to decide whether the bed fits between the wardrobe and the wall.
How wide is the frame
The finished width of a double bed depends on the frame type. A divan base is the narrowest, at about 140 cm, because there are no side rails. A wooden or metal frame is wider, at about 145 to 150 cm, because the rails sit outside the mattress. An upholstered frame can be wider still, because the padding adds bulk to the sides.
Measure the frame width in the shop, or ask the retailer for the overall dimensions in writing. The mattress size is standard, but the frame size is not, and two double beds from different makers can differ by 10 cm in overall width. That difference can decide whether the bed fits the room. Ask for the overall width in writing, because the number on the website is often the mattress size, not the finished frame size.
Double compared with a small double
A small double is 120 cm wide, which is 15 cm narrower than a double. That sounds like a small difference, but it gives each sleeper 60 cm instead of about 67 cm, which is noticeably tighter. A small double suits one sleeper who wants more room than a single, or two slim sleepers in a small room.
A double suits two average sleepers, and it is the size most couples choose. If the room is too narrow for a double frame, a small double is the fallback, but it is a compromise on sleeping space, not just on room space. If the room is only just too narrow for a double, a small double is a workable fallback, but check the bedding, because it takes different sheets and a smaller duvet. Double beds explains the size, the frames and the room needed in full.
| Bed | Mattress width | Frame width |
|---|---|---|
| Small double | 120 cm | About 125 to 130 cm |
| Double | 135 cm | About 140 to 150 cm |
| King | 150 cm | About 155 to 160 cm |
The mattress is 135 cm, but the bed in the room is wider. Measure the frame, not the mattress, when you check the fit.
Double compared with a king
A king size bed is 150 cm wide, which is 15 cm wider than a double. That gives each sleeper 75 cm instead of about 67 cm, and the extra width is often the difference between a comfortable night and a cramped one. A king is also 10 cm longer, at 200 cm instead of 190 cm.
The trade-off is room space. A king frame is about 160 cm wide overall, so it needs a bedroom at least 300 cm wide to leave walking space on both sides. If the room is under that width, a double is the better fit, even if a king would be more comfortable to sleep in. The extra width of a king also means larger bedding and a heavier mattress, which makes the bed harder to move and to make each morning.
How much width each sleeper gets
A double bed gives each of its two sleepers about 67 cm of width. That is less than the 90 cm a single bed gives one person, and it is the reason some couples find a double tight. Restless sleepers, broad-shouldered sleepers and couples of different sizes feel the shortage most.
If one sleeper moves a lot in the night, the other feels it, because there is little spare width to absorb the movement. A king size bed gives each sleeper 75 cm, and a super king gives 90 cm. The width question is really a question about how much space each sleeper needs, not just how wide the bed is. Couples who sleep at different times, or one of whom gets up in the night, will feel the shortage of width more, because there is little spare room to move without waking the other.
Room space for a double
A double frame at roughly 145 cm wide needs a bedroom at least 270 cm wide to leave about 60 cm of walking space on both sides. With space on one side only, a room of about 210 cm wide will do, but making the bed and getting in and out will be awkward. A room that is tight on width can still work if the bed sits against one wall, but that leaves only one side for getting in and out, which suits a single sleeper better than a couple. Measure the room and mark the outline on the floor with tape before ordering.
Also allow for the furniture around the bed. Bedside tables, a wardrobe and a chest of drawers all need space to open, and a double bed that blocks a wardrobe door is a daily irritation. What size is a double bed covers the length, the frame and the bedding sizes as well.