An oak dining table is a familiar sight in British homes, and for good reason. Oak is a hard, heavy wood with a clear grain, and a table made from it can last for decades if it is looked after. This guide explains the difference between solid oak and oak veneer, the grain and the finish, the sizes, and what to check before you buy.
Oak tables suit households that want a durable, warm table that can be refinished over time. They suit them less well where the table will take heavy knocks or where a light, easily moved table is wanted.
Best for
Households that want a table to last for decades.
Rooms where a warm, natural wood suits the furniture.
Watch out for
Heat and water marks on an unprotected top.
Oak veneer that cannot be sanded like solid oak.
What oak is like as a wood
Oak is a hardwood, which means it comes from a broadleaf tree, and it is dense, heavy and hard wearing. The grain is open and visible, with a pattern that runs along the length of the board, and the colour ranges from pale honey to a deeper brown, depending on the finish. Oak takes a stain well, so it can be finished pale, natural or dark, but the grain will still show through.
The hardness of oak is what makes it good for a dining table. It resists dents and scratches better than a softwood such as pine, and it does not mark as easily as a softer wood. The weight is also a benefit: an oak table is heavy, so it stays put and feels solid. The drawback of the weight is that an oak table is hard to move, and it needs a strong base and strong joints to carry the top.
Solid oak and oak veneer
A solid oak table is made from boards of oak throughout, including the top, the legs and the apron. It is the heaviest and most durable type, and it can be sanded and refinished if the top marks, which means it can be brought back to new several times over its life. Solid oak also moves slightly with changes in humidity, so a solid oak top may expand and contract a little across the seasons.
An oak veneer table has a thin layer of oak, usually less than a millimetre thick, glued to a board such as chipboard or MDF. It looks like oak, because the surface is oak, but it is lighter and less costly, and it cannot be sanded, because sanding would cut through the veneer to the board beneath. Oak furniture in general follows the same distinction, and the choice between solid and veneer is a choice between longevity and weight.
Grain and finish
Oak grain is open, which means the pores of the wood are visible, and the finish sits in those pores. A lacquered finish seals the grain and gives a smooth, wipeable surface, while an oiled finish soaks into the wood and leaves a matt, natural feel. Lacquer is easier to wipe clean and resists water better, while oil can be reapplied when it wears, and it gives a warmer look.
The finish affects both the look and the upkeep. A lacquered top can be wiped with a damp cloth and will resist a spilled glass, while an oiled top needs more care and will mark if water is left standing on it. Check the finish in the shop by looking at the top in a raking light, which shows scratches and uneven patches that are invisible from above. A good finish is even, with no dull patches and no raised grain.
Sizes and shapes
Oak dining tables come in the same shapes and sizes as other dining tables: rectangular, round and extendable. A rectangular oak table for six needs about 180 cm of length and 90 cm of depth, while a round oak table for four needs a diameter of about 110 cm. The weight of oak means that a large oak table needs a strong base, and a round oak table on a pedestal base needs a wide, heavy base to stay stable.
Allow about 60 cm of table width per person as a guide, and at least 75 cm behind each chair so a person can pull the chair out. Dining tables in general follow the same sizing, and oak does not change the numbers, although the weight of oak makes the table harder to move if the size is wrong. Measure the room first, and choose the size that fits the room, not the size that looks right in the shop.
Oak and other woods
Oak is often compared with other woods used for dining tables, such as pine, ash and walnut. Pine is softer and lighter, and it marks more easily, although it is less costly and easier to move. Ash is similar in hardness to oak but paler and with a finer grain, and it suits a lighter room. Walnut is darker and richer, with a finer grain than oak, and it is usually more costly.
Wooden dining tables cover the full range of woods, and the choice is partly about looks and partly about use. Oak suits a household that wants a hard wearing table with a visible grain, while a softer wood suits a household that wants a lighter table or a lower weight. The wood does not change how the table is used, but it changes how the table wears, and oak wears well.
Care and upkeep
An oak table needs coasters under hot mugs and mats under hot dishes, because heat and water mark the finish, especially an oiled finish. Wipe spills promptly with a damp cloth and dry the surface, because water left standing will raise the grain and leave a mark. Dust the top with a soft cloth, and avoid harsh cleaners, which can strip the finish.
An oiled oak top needs reoiling from time to time, when the surface looks dry or dull, and the oil should be applied thinly and wiped off, so it does not leave a sticky layer. A lacquered top does not need reoiling, but it cannot be repaired as easily if it is scratched: a scratch in lacquer needs the whole top refinishing, while a scratch in oil can be sanded out and reoiled locally. Keep the table out of direct sunlight where possible, because sunlight will fade the colour over time.
What to check before you buy
Check whether the table is solid oak or oak veneer, and ask if you are not sure. Look at the edges of the top: a solid oak top shows the grain on the edge, while a veneer top shows a thin layer of oak over a board. Check the joints under the top and the fixings that hold the legs, and press down on the corners to test the stability.
Check the finish in a raking light, and run your hand across the top to feel for rough patches or raised grain. Sit at the table if you can, and check that the height suits the chairs you will use with it. An oak table is a long term purchase, and the details that matter are the wood, the finish and the joints, which are the things to check before you buy.
Oak is a wood that rewards care. Keep it dry, keep hot things off the top, and it will outlast the chairs around it.
| Feature | Solid oak | Oak veneer |
|---|---|---|
| What it is | Oak boards throughout | Thin oak layer on a board |
| Weight | Heavy, hard to move | Lighter, easier to move |
| Repair | Can be sanded and refinished | Cannot be sanded, veneer is too thin |
| Movement | Expands slightly with humidity | Stable, board does not move much |