A wooden dining table is the most common type in British homes, and it ranges from a solid oak table that will last for decades to a pine table that is light and easily moved. The wood decides how the table wears, how it marks, and whether it can be repaired. This guide covers the wood types, the joints, the finishes, and what to check before you buy.
Wooden tables suit households that want a warm, natural surface that can be repaired over time. They suit them less well where the table will take heavy knocks or where a wipe clean surface matters most.
Best for
Households that want a table to last and to be refinished.
Rooms where a natural wood suits the furniture.
Watch out for
Heat and water marks on an unprotected top.
Softwoods that dent easily under plates and glasses.
Solid wood
A solid wood table is made from boards of wood throughout, including the top, the legs and the apron. It is the heaviest and most durable type, and it can be sanded and refinished if the top marks, which means it can be brought back to new several times over its life. Solid wood also moves slightly with changes in humidity, so a solid wood top may expand and contract a little across the seasons.
The movement is normal, and a well made solid wood table allows for it, with the top fixed in a way that lets it move without splitting. A table that is fixed too rigidly will split or warp, because the wood cannot move. Check the fixings under the top: they should hold the top firmly but allow a little movement, and the top should be flat, with no cupping or bowing across its width.
Veneer on board
A veneer table has a thin layer of real wood glued to a board such as chipboard or MDF. It looks like wood, because the surface is wood, but it is lighter and less costly than solid wood, and it cannot be sanded, because sanding would cut through the veneer to the board beneath. Veneer tables are stable, because the board does not move with humidity the way solid wood does.
The quality of a veneer table depends on the thickness of the veneer and the quality of the board. A thick veneer, about 2 mm, can be lightly sanded and repaired, while a thin veneer, less than a millimetre, cannot. The edges of a veneer top should be banded with solid wood or a matching edge, so the board does not show. Check the edges and the corners, because a veneer that is lifting at the edge is a sign of a table that was made down to a price.
Oak, ash, walnut and pine
Oak is the most common hardwood for dining tables, and it is hard, heavy and has a visible grain. Oak dining tables are durable and can be refinished, and they suit a household that wants a table to last. Ash is similar in hardness to oak but paler, with a finer grain, and it suits a lighter room. Walnut is darker and richer, with a fine grain, and it is usually more costly than oak or ash.
Pine is a softwood, lighter and softer than oak, and it marks more easily. A pine table will dent under a plate or a glass, and it will show the marks of daily use more quickly than a hardwood table. That is not necessarily a fault: a pine table suits a household that wants a light, easily moved table, and the marks can be part of its character. Oak furniture in general covers the wider range of oak pieces, and the same wood choices apply across the room.
Joints and stability
The joints under the top decide whether a wooden table stays stable. The legs are usually joined to the apron, which is the frame under the top, with mortise and tenon joints, dowels or bolts, and the top is fixed to the apron with screws or brackets. A table with a solid apron and strong joints will be stiff, while a table where the legs are simply screwed into the top will wobble.
Check the stability by pressing down on the corners and by rocking the table from side to side. A well made table stays still, and a poorly made one moves. Look under the top at the joints, and check that they are tight, with no gaps and no glue showing. A joint that is open or that has glue squeezing out is a sign of poor work, and it will only get worse with use.
Finishes: oil, lacquer and wax
A wooden table is finished with oil, lacquer or wax, and the finish decides how the top looks and how it is cared for. An oiled finish soaks into the wood and leaves a matt, natural feel, and it can be reapplied when it wears. A lacquered finish seals the wood and gives a smooth, wipeable surface that resists water, but it cannot be repaired locally if it is scratched. A waxed finish gives a soft sheen and can be reapplied, but it marks easily with heat and water.
The finish should be even, with no dull patches and no raised grain. Check it in a raking light, which shows scratches and uneven patches that are invisible from above, and run your hand across the top to feel for rough patches. A good finish is smooth to the touch, and it should be easy to wipe clean with a damp cloth.
Care and upkeep
A wooden table needs coasters under hot mugs and mats under hot dishes, because heat and water mark the finish, especially an oiled or waxed finish. Wipe spills promptly with a damp cloth and dry the surface, because water left standing will raise the grain and leave a mark. Dust the top with a soft cloth, and avoid harsh cleaners, which can strip the finish.
An oiled top needs reoiling from time to time, when the surface looks dry or dull, and the oil should be applied thinly and wiped off, so it does not leave a sticky layer. A lacquered top does not need reoiling, but a scratch in lacquer needs the whole top refinishing. Keep the table out of direct sunlight where possible, because sunlight will fade the colour over time, and keep it away from radiators, which dry the wood and can cause it to split.
What to check before you buy
Check whether the table is solid wood or veneer, and ask if you are not sure. Look at the edges of the top and the joints under it, and test the stability by pressing on the corners. Check the finish in a raking light, and run your hand across the top to feel for rough patches.
Sit at the table if you can, and check that the height suits the chairs you will use with it. Dining tables in general are about 75 cm high, and the chairs should have a seat about 45 cm high to match. A wooden table is a long term purchase, and the details that matter are the wood, the joints and the finish, which are the things to check before you buy.
Wood is a living material, even after it is made into a table. Keep it dry, keep hot things off the top, and it will serve the household for decades.
| Feature | Solid wood | Veneer on board | Pine |
|---|---|---|---|
| Weight | Heavy, hard to move | Medium | Light, easy to move |
| Dents and marks | Resists dents well | Resists dents well | Dents easily |
| Repair | Can be sanded and refinished | Usually cannot be sanded | Can be sanded and refinished |
| Movement | Moves slightly with humidity | Stable | Moves slightly with humidity |